Fire Pull Stations

Q: What is a fire alarm pull station?

A fire alarm pull station is a manual initiating device used to send an alarm signal to a compatible fire alarm system when activated. Pull stations are part of a life-safety system and must be selected, installed and serviced in accordance with the approved system design, product listings and applicable local codes.

Q: What is the difference between single-action and dual-action pull stations?

A single-action pull station is activated with one primary motion, while a dual-action model requires an additional step before the alarm can be initiated. The appropriate type depends on the fire alarm system design, occupancy requirements and applicable codes. Replacement devices should match the requirements of the approved system.

Q: Are fire alarm pull stations compatible with any fire alarm panel?

No. Compatibility can depend on the panel, initiating circuit or addressable protocol, voltage, wiring method and device listing. Do not select a pull station based only on appearance or mounting style. Verify the exact panel and system requirements with the manufacturer documentation and the qualified fire alarm professional responsible for the installation.

Q: Can I replace a fire pull station myself?

Fire alarm equipment is part of a regulated life-safety system. Replacement, testing and programming should be handled according to local requirements by qualified personnel, and the new device must be compatible with the approved fire alarm system. Incorrect substitutions can prevent proper alarm operation or create inspection and compliance issues.

STI GR-RS-22-EN Global ReSet Red FIRE Text SPC Surface With Shield

$81.64

SigCom SGX-32SK2-SC SGX32 Series Explosion Proof Pull Station, Single Action, DPDT, Red

$940.78

SigCom SGX-32SK2-BL SGX32 Series Explosion Proof Pull Station, Single Action, DPDT, Blue

$1,122.64

SigCom SGX-32SK1-SC-YL SGX32 Series Explosion Proof Manual Pull Station, Dual Action, DPDT, Yellow

$1,181.71

SigCom SGX-32SK1-SC SGX32 Series Explosion Proof Manual Pull Station, Dual Action, DPDT, Red

$967.20

SigCom SGX-32SK1-SC-BL SGX32 Series Explosion Proof Manual Pull Station, Dual Action, DPDT, Blue

$1,181.71

SigCom SG-42SK2 Series Single Action Manual Pull Station, Die Cast Metal

$65.52

SigCom SG-42SK1-NY SG‑42 Series Dual-Action Manual Pull Station, SPST, NYC Stripe

$83.26

SigCom SG-42CXK2-YL-B SPECTRUM Series Single Action Pull Station, DPDT with Key, Yellow

$154.85

SigCom SG-42CXK2-RD-B SPECTRUM Series Single Action Pull Station, DPDT, with Key, Generic Red

$154.85

SigCom SG-42CXK2-GR-B SPECTRUM Series Single Action Pull Station, DPDT with Key, Green

$154.85

SigCom SG-42CXK2-BL-B SPECTRUM Series, Single Action Pull Station, DPDT with Key, Blue

$154.85

Fire Alarm Pull Stations & Manual Initiating Devices

Browse fire alarm pull stations and manual initiating devices for compatible fire alarm systems. Compare operation type, mounting method, electrical characteristics and system compatibility for commercial, institutional and life-safety applications. Fire alarm components are system-dependent, so model numbers should be verified before replacement or expansion.

Selecting the Correct Fire Alarm Pull Station

Confirm single-action or dual-action operation, surface or flush mounting, addressable or conventional communication and reset requirements. The pull station must match the fire alarm control panel and project requirements. Use current manufacturer documentation and qualified life-safety professionals for final specification and installation.

Fire Pull Stations

Filter

Products Category

Featured product

Fire Alarm Pull Stations & Manual Initiating Devices

Selecting the Correct Fire Alarm Pull Station

FAQ

What is a fire alarm pull station?

What is the difference between single-action and dual-action pull stations?

Are fire alarm pull stations compatible with any fire alarm panel?

Can I replace a fire pull station myself?

Trending Search